HOTLINE

Phone: (+357) 24823938

FRIULSIDER POLYURETHANE FOAM 750ML PUR961 PISTOL

/

Specifications: Suitable substrates: wood, concrete, brick, metals, aluminum.Unsuitable substrates: polyethylene, silicone, Teflon.

How to use: The surfaces must be clean, softened and preferably moist.Before use, shake the container sharply upside down (with the valve down).Screw the spray gun to the cylinder.To dispense the foam: adjust the dosing screw on the spray gun and depress the trigger.When using, always keep the cylinder upside down (with the valve down).For short breaks at work: hold the bottle screwed to the spray gun.For long work breaks: clean the spray gun with the special Friulsider cleaner.

Curing time: 1.5 ÷ 5 hours (depending on temperature and humidity)

Temperature: installation time: min. + 5 ° C (support) / + 20 ÷ 25 ° C (cylinder).Operating temperature: -40 ° C ÷ + 90 ° C

FRIULSIDER POLYURETHANE FOAM 750ML PUR960 HAND

/

Volume (free foam) 40 – 45 lt

Density 16 ÷ 18 kg / m3
20 ÷ 25 kg / m3
16 ÷ 18 kg / m3

Minimum installation temperature + 5 ° C (support / surface) / + 20 ÷ 25 ° C tank / container)

Interconnection time Free binding time 18 ° C – 60% RH 5 ‘÷ 10’

Curing time 1.5 ÷ 5 hours (depending on temperature and humidity / depending on temperature and humidity)

Cutting Cutting time cm3cm 18 ° C – 60% RH 20′-25 ’25’-30′ 20′-25 ‘

Operating temperature Temperature resistance -40 ° C ÷ + 90 ° C

Dimensional stability Maximum dimensional stability -1%

Water absorption Water absorption DIN 53428 max 1 vol. %

Compression strength Compressive strength DIN 53421 0.04 ÷ 0.05 MPa

Tensile strength Tensile strength DIN 53455 0.07 ÷ 0.08 MPa

Elongation at break Elongation at break DIN 53455 20 ÷ 25% 20 ÷ 25% 20 ÷ 30%

Thermal conductivity Thermal conductivity 20 ° C DIN 52612 0.036 W / mK 0.039W / mK 0.036W / mK

ECO SERVICE GAS LEAK CONTROL SPRAY 400ML

/

The gas detector is the fastest and most reliable system for detecting gas leaks at those points that are under pressure (boilers, ovens, heaters, piping).
Spray the product from a distance of 20 cm from the surface and wait for the formation of bubbles in case of gas leakage.
It is perfect for tiny gas leaks.

Shopping Cart