Wynn’s Catalytic Converter & Sensor Cleaner for petrol and hybrid petrol engines optimizes catalytic converter efficiency and ensures optimal operation of oxygen sensors.

Removes deposits (oil and non-combustible fuel particles), reduces emissions, ensures optimum catalytic converter and oxygen sensor performance and shows catalyst and sensor life. In addition, it prevents error codes in the engine management system and ensures more efficient fuel consumption by restoring the air-fuel ratio. Restores engine power and is therefore particularly suitable for many urban or road trips. It is also safe for all flue gas treatment systems.

Wynn air intake & carburetor cleaner designed to remove airborne contaminants and deposits, carburetor jets and adjusting screws and all visible carburetor components. Active solvents dissolve and remove dirt very quickly. The strong spray improves the cleansing action.
Cleans the carburetor and air intake system without disassembly.
Dissolves resin, varnish and deposits
-In the system of introduction of gasoline engines and carburetors
-In visible carburetor components (ventilation ducts, adjusting screws, flow meter, external parts).
– On the throttle.
-In crankcase ventilation valves.

Appearance: Colorless clear liquid (active substance)
Density at 15C: 0.850 kg / dm³ (active substance)
Flash point: <21C (active substance)
Propellant gas: propane
For carburetors
To clean visible parts: Remove the air filter. Start the engine and let it warm up. Adjust the throttle to the open position. With the engine warm, spray the product into the air intake manifold on dirty components. Spray at intervals. If necessary, increase the engine speed to prevent the engine from shutting down due to a rich mixture. Continue until all components are clean.
Intake manifold / throttle
Remove the air filter, warm the engine, adjust the throttle to the open position. With the engine warm, spray the product into the intake manifold at intervals. Spray the product on the throttle valve. If necessary, increase the engine speed to prevent the engine from shutting down. If the injection system is equipped with an air flow valve, open the valve manually if necessary. Automatic air damper Remove the air filter. With the engine off, spray the product on both sides of the throttle by opening and closing manually. Turn off the P.A.C. from the side of the crankcase. Insert the expansion tube into the open portion of the valve and spray the product while moving the valve back and forth. Start the engine, spray the product on the valve several times to rinse thoroughly. Spray the product on both sides of the throttle with manual opening and closing.