SANDTEX FINE TEXTURE MAT WHITE 5L

Sandtex Trade Fine Textured Matt is a water-based, high opacity, fine textured finish for exterior masonry surfaces. Has an aggregate reinforced film with an anti-carbonation coating which prevents dirt build up on the surface and a fungicide to prevent mould growth. Provides 15 years of long lasting protection.
Can be applied to sound, previously coated render without thinning. On sound bare render, thin the first coat with water to manufacturer’s recommendations. On chalky, friable surfaces, apply a stabilising solution as a priming coat, before applying a masonry coating.
Application is by brush or roller with coverage up to 7sq/m per litre. Touch dry between 1-2 hours and recoatable between 4-6 hours.

FRIULSIDER SPRAY TECNICO G92 400ML BITUMINOUS ANTI-CORROSIVE

Product suitable for waterproofing and surface prodection. After drying it creates a permanent an elasting coating
with high resistance to abrasion and atmospheric agents. Effective above all for facades, it avoids the penetration
of humidity in the fixing shan, excluding corrosion phenomena.

Dries to touch in approximately 30 minutes and completely in 24 hours.

Shake the bottle well before use for at leats 1-2 minutes, until you hear the inner spheres move freely.


Validity of the product stored in its original packaging and stored in a dry place at room temperature (min +5°C max +40°C) in a vertical
position: at least 24 months

FRIULSIDER SPRAY TECNICO G63 400ML LAMELLAR 98% ZINC

Cold galvanizer with high molecular weight. It chemically solidifies producing a long lasting metal coating which protects all metal surfaces from
oxidation. It forms an uniform layer which can be painted or left as a final protection. Resistant to more than 400 hours in salt spray.

APPLICATION FIELDS: Surfaces in metal as iron, aluminum, steel. Protection of ferrous metallic structures, pipelines, gutters, fences, work tools
etc. HOW TO USE: Thoroughly clean the material to be treated to eliminate encrustations and traces of rust using a synthetic thinner.

If necessary, sand with fine abrasive paper. Turn the bottle upside down and shake well until you feel the marbles move freely inside the bottle,
spray a couple of times and proceed with painting. To avoid dripping, apply two light coats at a distance of about 20-30 cm from the material.


Maximum anticorrosive protection, anti-rust, over-paintable.

Validity of the product stored in its original packaging and stored in a dry place at room temperature (min +5°C max +40°C) in a vertical
position: at least 24 months

FRIULSIDER SPRAY TECNICO G62 400ML BRIGHT ZINC

Cold galvanizer with high molecular weight, it chemically solidifies producing a long lasting metal coating. It protects all metal surface
from oxidation. It forms an even resistant layer which can be painted or left as a final protection. It is ideal for retouching, for final finish
and repairing of galvanized parts.

Protective, anti-rust, over-paintable.


Store the product unopened at room temperature in a vertical position.

Validity of the product stored in its original packaging and stored in a dry place at room temperature (min +5°C max +40°C): at least 24
months.

FRIULSIDER SPRAY TECNICO G61 400ML DARK ZINC 98%

Professional cold galvanizer with high zinc content. It chemically solidifies producing a long lasting metal coating which protects all
metal surfaces from oxidation. It forms a uniform and over-paintable layer which resists to atmospheric agents even in particularly
difficult and prolonged conditions.

Protective, anti-rust, over-paintable.

Store the product unopened at room temperature in a vertical position

Validity of the product stored in its original packaging and stored in a dry place at room temperature (min +5°C max +40°C): at least 24
months.

FRIULSIDER SPRAY TECNICO G60 400ML LIGHT ZINC

Professional cold galvanizer. It chemically solidifies producing a long lasting metal coating which protects all metal surfaces from
oxidation.

It forms a uniform and over-paintable layer which resists to atmospheric agents even in particularly difficult and prolonged
conditions.

Protective, anti-rust, over-paintable

Store the product unopened at room temperature in a vertical position

Validity of the product stored in its original packaging and stored in a dry place at room temperature (min+5°C max+40°C): at least 24
months.

COSMOSLAC BUMPER PAINT SPRAY 400ML BLACK N561

Colors specifically for car bumpers and generally for hard plastic surfaces.

They have excellent adhesion, not broken, withstanding the stresses and damage
from gravel and are the ideal solution for restoring and painting of damaged bumpers,
spoiler, etc.

Use any hard plastic, except for teflon and polypropylene.

Makes the surface satin finish.

Shopping Cart