MERCOLA LIQUID GLASS TUB & TILE FOR BATHROOM/KITCHEN RENOVATION 1KG
2-component enamel for porcelain, ceramic tiles, glass and fiberglass in kitchens and bathrooms. Provides excellent adhesion, durability and color retention in high humidity areas.
CEMENTONE COLOURS FOR CEMENT 1KG RED BRICK
Permanently colours concrete, mortar, render or screed.Does not effect the performance or durability of any mortar mix.For general use use 1.2kg to 25kg cement.
VECHRO ENAMEL FOR RADIATORS 750ML WHITE
Special gloss alkyd enamel, with excellent resistance to high temperature. Suitable mainly for radiators. It gives very good adhesion, hardness, fast drying and low yellowing.
SARATOGA FERNOVUS RADIATOR SPRAY WHITE 400ML
FERNOVUS RADIATOR Spray is a shiny, acrylic/silicon-resin base enamel which resists heat up to 120°C. It does not yellow or peel. Can be applied directly onto rusted surfaces. Useful for: radiators, heaters, stovepipes, electric convectors, and all surfaces and objects subjected to heat.Instructions for use: radiators must be turned off and cold. The surfaces are to be clean, dry, degreased and free of any non-adhering dust, grease or paint as well as any crumbling rust. Shake the cylinder well until the sound of the marbles can be heard in the interior, continuing to shake for another minute. FIRST COAT: apply the product in light, criss-crossed passes, holding the cylinder vertically and at a distance of 25-30 cm. For best, more uniform results, shake the cylinder occasionally during use. Optimal cylinder temperature is 20-25°C; do not use at temperatures less than 15°C. Dries to the touch in approximately one hour. SECOND COAT: can take place any time. Wait until the paint has completely hardened, at least 24 hours after application, before subjecting it to heat. Comes with self-cleaning valve.Paint removal: with acetone and/or cellulose thinner.
RUSTOLEUM GALVA ZINC-ALU GALVANIZING PAINT 1KG
RUST-OLEUM® Bright Galvanizing 1017 is a fast drying, zinc rich coating based on an epoxyester resin. The product contains pure zinc and aluminium as pigments and provides cathodicprotection.Withstands up to 500 hours or salt spray (DIN 50021 SS) 90% pure zinc in the form of dry film paintFull protection for pure and galvanized steel Heat resistant up to 300ºC Excellent protection against moisture and salt sprayCoverage:11.5m²/LDrying Time:30 minutesApplication Method:BRUSHUse:INTERIOR & EXTERIORTool Cleaner:WHITE SPIRITRECOMMENDED USESRUST-OLEUM Bright Galvanizing 1017 should be used on new, bare steel, blasted steel orgalvanized steel surfaces.RUST-OLEUM Bright Galvanizing 1017 is primarily intended for brush application on smallareas or for touch-up.RUST-OLEUM Bright Galvanizing 1017 can be recoated with non-saponifiable coatings.RUST-OLEUM Bright Galvanizing 1017 should be used as a single coat in light industrialexposures, corrosive environments and high humidity areas.TECHNICAL DATAAppearance: FlatColour: AluminiumDensity: 1,77 kg/ltr% zinc/alu: 76% in dry film (67,5% Zn / 8,5% Al)Solids Contents: 41,8% by volumeViscosity: 88 – 92 KU /Krebs Stormer Units at 20°CRecommended film thickness: 35 µm dry, equals 85 µm wetVOC-content: 477 g/l max.Ready-to-use mixture: 497 g/l max.Category: A/iEU Limit value: 600g/l (2007) / 500g/l (2010) CoverageTheoretical: 11,5 m²/l at 35 µm dry6,5m²/kg at 35 µm dryPractical: Practical coverage depends on many factors such as porosity androughness of the substrate and material losses during application.SURFACE PREPARATIONRemove grease, oil and all other surface contaminations by alkaline or high pressure (steam)cleaning in combination with appropriate detergents. For optimum results remove rust, rustscale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1 : 1988),blast profile max. 50 µm. The surface must be clean and dry during application.DIRECTION FOR USETo ensure homogeneity, coating materials should be thoroughly stirred prior to use.To avoid settlement of the zinc pigments on the bottom of the can stir regularly duringapplication. APPLICATION & THINNINGBrush: Up to 5 vol. %; RUST-OLEUM Thinner 160.Use natural bristles, longhair brushes.Cleanup: Use RUST-OLEUM Thinner 160 or aromatic hydrocarbons.APPLICATION CONDITIONSTemperature of air, substrate and coating material between 5 and 35°C and relative humiditybelow 85%. The substrate temperature must be at least 3°C above dew point.REMARKSMaximum dry film thickness per coat: 75 µm dry, equals 180 µm wet.RUST-OLEUM Bright Galvanizing 1017 should preferably be applied in a maximum dry filmthickness of 35 µm if recoated.SAFETYConsult Safety Data Sheet and Safety Information printed on the can.SHELLIFE / STORAGE CONDITIONS5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not indirect sunlight at temperatures between 5° and 35°C.
V33 VARNISH DECO RAW METALS 500ML
Colourless anti-rust, anti-corrosion varnish based on alkyd resin. Lasting anti-rust protectionEasy applicationResistant to weather conditionsDirect application onto rustNon-drippingTime Between Coats:12 hours Drying Time:2 hours Coverage:20m²/L Use:INTERIOR & EXTERIORApplication Method:ROLLER, BRUSH Tool Cleaner:WHITE SPIRIT
ECO SERVICE KONVERTER RUST TRANSFORMER 750ML
Konverter transforms rust into a stable, black chemical compound and forms a film that protects all ferrous surfaces: gates, entrance doors, railings, gutters and anything made of iron. Spread the product with a brush directly on the rust, leave to dry for at least 12/24 hours than overpaint with any type of paint, even long after application. KONVERTER LIQUID is ready to use and yields about 15 sq.m per litre.
ECO SERVICE ALLUMINIO SPRAY 400ML
Aluminium is a spray product with a high aluminum content. It forms a film which restores and protects all aluminum surfaces.It can be painted upon or left as a final protection. Shake sprays products very well before use.High heat resistance.
RUSTOLEUM COMBICOLOR HAMMERTONE ANTI-RUST PRIMER AND TOPCOAT 750ML LIGHT GREY
Anti-rust primer and topcoat in one, based on alkyd resins for direct application onto rust. Long lifetime Maximum elasticity Low odour Excellent anti-corrosion protectionExcellent one-coat coverResistant to knocksCoverage:10.5m²/L Drying Time:2 hoursTime Between Coats:8-16 hoursUse:INTERIOR & EXTERIORApplication Method:ROLLER, BRUSH, SPRAYThinner:THINNER 7302 (COMBICOLOR)RECOMMENDED USESCombiColor Hammertone 7300 can be applied directly on bare, manually derusted or withCombiPrimer Anti-Corrosion 3369/3380 primed steel.CombiColor Hammertone 7300 is intended for brush and roller application and can also beapplied by air spray.On properly primed or previously coated surfaces CombiColor Hammertone 7300 offerscorrosion protection in a light industrial environment.For metal structures in a more aggressive industrial environment, application of an additionalCombiPrimer Anti-Corrosion 3369/3380 is recommended or a second coat ofCombiColor Hammertone 7300 can be applied. CoverageTheoretical: 8.0 – 8.5 m²/l, depending on colour.Practical: Practical coverage depends on many factors such as porosity androughness of the substrate and material losses during application.SURFACE PREPARATIONRemove oil, grease and all other contamination by alkaline or high pressure (steam) cleaningin combination with appropriate detergents.Remove rust scale, loose mill scale, loose rust and loose coatings by scraping and wirebrushing to St3 (ISO 8501-1: 1988), light blast cleaning or sanding, followed by priming withthe recommended CombiPrimer Anti-Corrosion 3369/3380.Sand previous coatings in good condition to provide a key for adhesion and checkcompatibility. The surface must be clean and dry during application.Galvanised, Zinc and Aluminium surfaces have to be primed first with CombiPrimer Tack Coat3302. DIRECTION FOR USETo ensure homogeneity, coating materials should be thoroughly stirred prior to use.APPLICATION & THINNINGBrush: Up to 10 vol. % with 7301.Use natural bristles, long hair flat brushes for optimal hammertoneappearance.Roller: Up to 10 vol. % with 7301.Use short nap poly-amide (Perlon 6 – 12 mm) rollers.Air-atomised spray: 10-25 vol.% Rust-Oleum Thinner 7302.Gravity cup and pressure cup.Tip size: 1.0 – 1.5 mm. Atomising pressure 2 – 4 bar.Cleanup: Use Rust-Oleum Thinner 7301 or mineral spirits.APPLICATION CONDITIONSTemperature of air, substrate and coating material between 10 and 35°C, relative humiditybelow 85%. The substrate temperature must be at least 3°C above dew point.REMARKSBrushes, rollers and cleaning solvents should only be used for hammertone application.SAFETYConsult Safety Data Sheet and Safety Information printed on the can.SHELLIFE / STORAGE CONDITIONS5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not indirect sunlight at temperatures between 5° and 35°C.
ISOMAT DOMOSIL-POOL SILICONE SEALANT FOR PERMANENT WATER IMMERSION 280ML CLEAR
Silicone sealant resistant to permanent water immersion, such as swimming pools, aquariums etc. Appropriate for sealing vertical or horizontal joints 3-40 mm wide, for indoor and outdoor applications. Has very good adhesion to surfaces such as glass, porcelain, aluminium, ceramics etc. Suitable for sealing joints on boats, glass structures etc. It cannot be overpainted.