CL 27 GREASE CLEANER is a powerful cleaner that removes dried and burnt oils and fats from barbecues, grills, ovens, hoods, sinks, etc. Its special composition acts in depth, easily and quickly removing accumulated fatty deposits from all surfaces. Suitable for indoor and outdoor use.
Cleanses and protects. Helps prevent rust and spasms. Loosens nuts and bolts, and more!Ideal for use around the house or vehicle.Long termVery effective
WD-40 lubricating oil, 400 mlIdeal product for lubrication and rust removalRecommended for:Garden tools and equipmentBattery terminalsSpark plugsBicycle steeringDoor locks and hingesPower toolsEnginesAluminum alloysExhaust
Multipurpose Grease is a general lubricant suitable for home, industry, laboratories, marine uses. Lubricates and protects without damage or oxidation over time. Good temperature resistance and is the perfect product to eliminate friction on metals and lubrication of any mechanical parts.
LOCTITE 638 is designed for welding cylindrical fittings, especially where the joint gaps can reach 0.25 mm. It works not only on active metals but also on passive substrates, showing a strong hardening performance. The product offers high temperature performance and good oil tolerance and tolerates small surface contaminants.Your benefitsHigh strength to all metals, including passive substrates (eg stainless steel).Ideal for shafts, gears, pulleys and similar cylindrical parts.Maximum. gap size: 0.25 mmOperating temperature range: -55 to + 180 ° CShear tensile strength in N / mm²:> 25Mounting steel: 4 minutes.Thixotropy: No.
General purpose sealant for all coarse metal threads.Suitable for fast applications at low temperatures, e.g. maintenance of outdoor facilities.
Flange type: RigidHardening method: AnaerobicOil resistance: ExcellentWater / glycol resistance: ExcellentOperating temperature: -55C ° to + 15OC °Ideal for use on rigid metal components e.g. cast iron fittings and pump housings.
LOCTITE 518 hardens when there is no air gap between the metal surfaces. It is an anaerobic sealing material designed for use on rigid metal flanges mating surfaces. It fills gaps up to 0.25 mm and forms a flexible, chemical-resistant seal that will not tear or disintegrate. Spare parts are easily disassembled, even after extensive maintenance.Features: Semi-flexible, anaerobic flange of medium strength flange.For active and inert rigid metal flanges.Gel type retention.Seals immediately against low pressure.Reduces inventory costs.Withstands high pressure when fully hardened.
LOCTITE® 510 is a very high heat resistance sealant for rigid metal flanges. It has a gap filling capacity of up to 0.25 mm and increases the structure of the assembly.Recommended for sealing rigid flanges in gearboxes and engines.Immediate sealing at low pressure.Ideal for those flanges where high chemical and thermal resistance is required.Increases the torque capacity of assembled flanges.
LOCTITE 271 is a red, low viscosity, methacrylate based threaded lock with high strength.It has a fixing time of 10 minutes in steel, 5 minutes in brass and 15 minutes in stainless steel.Withstands light contact with industrial oils. Suitable for all metal threads.Release torque on M10 bolts at 26 Nm. Fluorescent under ultraviolet light.Effective for all metal joints and stainless steel as well as coated. Particularly suitable for chrome surfaces.Prevents loosening and leakage due to vibrations in threads such as screws, nuts and bolts. Highly recommended for permanent restraint, where maximum strength is required. It is very difficult to disassemble with hand tools. Heat to 300C.Not suitable for plastics and wood.Benefits:Low viscosity.Fluorescent so that quality control and inspection can be done.Prevents unwanted movement, sagging, leaks and corrosion.Vibration resistant.High strength.Seals threads – allows locking in through holes.Applications: For threads up to M20.Operating temperature: -55oC to + 150oCIt acquires its initial strength in about 10-30 minutes.Full durability in 12 hoursThe air enclosed in the bottle is required to keep the product in liquid form.Instructions for use:Clean the surface of the components. Use enough product to cover the threads to be assembled. Assemble the components and allow the material to harden.
