Rubber sticker on the bottom.Against the air currents for the bottom of the door stops the cold, heat, dust, noise, etc.Can be used on all types of doors.Ideal for smooth floors (wood, marble, tiles) with gaps of 2-3 mm.Length 1m (easily cut if needed).
Waterproof Wall Tile Grout is a cement based powdered grouting compound.Technical Data:Can be used on joints up to 3mmSuitable for use in kitchens, bathrooms and showersCan be used internally or externallySize: 500g
SikaCeram® CleanGrout is a cementitious grout for joints in floors and walls, with a width between 1-8 mm. The special additives contained in its composition give it antibacterial properties and resistance to mold growth, while maintaining its color stability and making it resistant to abrasion and water repellent. It is suitable for interior and exterior applications.Advantages:Installation on floors and wallsWater-repellentAbrasion-resistantHigh degree of hardnessUV-resistantFrost-resistantContains antibacterial additives
MULTIFILL 2-5 is a cement-based, colored tile grout offering high mechanical strength and excellent color stability. Suitable for joint width 2-5mm.Available in white, black, grey, light grey, Bahama beige, brown, light brown, dark grey, anemone and cement grey.
Added to structural mortars and coatings, it increases adhesion, imparts tightness, flexibility and generally improves their quality.
ISOMAT AK 20 is a high performance, flexible, polymer-modified, cement-based tile adhesive with extended open time and no vertical slip. Provides high initial and finaladhesion strength, moisture resistance and flexibility.Certified according to EN 12004 and classified as type C2 TE S1 adhesive. CE marked.Fields of applicationISOMAT AK 20 is suitable for fixing absorbent or non-absorbent tiles (e.g. “grèsporcellanato”), natural stone, decorative bricks, large-format tiles, etc. on walls or floorson various substrates, especially where high adhesion, flexibility and moisture resistanceare required (e.g. old tile layers, heated floors, gypsum boards, etc.). Suitable for indoor and outdoor use.Technical dataForm: cementitious powderColors: grey, whiteWater demand: 7.75 l/25 kg bagApplication temperature:from +5°C to +35°CApplication thickness: up to 15 mmPot life: at least 6 hOpen time: at least 30 minMinor adjustmentsopen time: at least 30 minSlip: ≤ 0.5 mmGrouting on walls: after 3-8 hGrouting on floors: after 24 hAdhesion strength after: 28 days: ≥ 1.75 N/mm2 heating at +70ºC: ≥ 1.50 N/mm2 immersion in water: ≥ 1.30 N/mm2 25 freeze-thaw cycles:≥ 1.50 N/mm2Service temperature: from -30°C to +90°CDeformability: > 2.5 mm(EN 12004-2)All measurements were conducted accordingto EN 12004-2.Directions for use1. SubstrateThe surface to be overlaid must be clean, free of dust, grease, paint, loose material, etc.Dampening of the substrate before application is recommended.2. ApplicationISOMAT AK 20 is gradually added to water under continuous stirring, until a uniform pasteis formed. A low speed mixer is recommended for mixing.The mixture should be left for about 5 minutes to settle and then slightly stirred again. Thetile adhesive should be spread (“combed”) on the substrate using a notched trowel, in orderto be uniformly applied on the whole surface. The tiles should be fixed by pressing to thedesired position. The applied mixture must be covered with tiles within 30 minutes in order to avoid “skin”formation, i.e. before the adhesive film starts setting.Consumption1.5-4.0 kg/m2, depending on the trowel notchsize and the nature of the substrate.
ISOMAT AK10 is a non-slip, cement-based tile adhesive for floors and walls. Provideshigh initial and final adhesive strength, as well as moisture resistance.Certified according to EN 12004 and classified as type C1 T adhesive. CE marked.Fields of applicationISOMAT AK 10 is suitable for fixing ceramic tiles on walls or floors, on surfaces made ofconcrete, brickwork, plaster, etc., indoors or outdoors.Technical dataForm: cementitious mortarColors: grey, whiteWater demand: 6.75 l/25 kg bagApplication temperature: from +5°C to +35°CApplication thickness: up to 10 mmPot life: at least 6 hOpen time: at least 20 minMinor adjustmentsopen time: at least 30 minSlip: ≤ 0.5 mmGrouting on walls: after 3-8 hGrouting on floors: after 24 hAdhesive strength after: 28 days: ≥ 1.10 N/mm2 heating in +70ºC: ≥ 0.50 N/mm2 immersion in water: ≥ 0.65 N/mm2 25 freeze-thaw cycles: ≥ 0.50 N/mm2Service temperature: from -15°C to +60°CAll measurements were conducted accordingto EN 12004Directions for use1. SubstrateThe surface to be overlaid must be clean, freeof dust, grease, paint, loose material, etc.Dampening of the substrate before applicationis recommended.2. ApplicationISOMAT AK 10 is gradually added to waterunder continuous stirring, until a uniform pasteis formed. A low speed mixer is recommendedfor mixing.The mixture should be left for about 5 minutesto settle and should be stirred slightly again.The tile adhesive should be spread and“combed” on the substrate using a notchedtrowel, in order to be uniformly applied on thewhole surface. The tiles should be pressurefixed to the desired position.The applied mixture must be covered with tileswithin 20 minutes in order to avoid “skin”formation, i.e. before the adhesive film startssetting.ElastificationFor tiling on unstable substrates subject tovibration or expansion-contraction, such asgypsum boards, chipboards, heated floors,terraces, balconies, etc. it is necessary to add5-10 kg of ADIFLEX-B to 25 kg of ISOMAT AK10, plus a quantity of water depending on thedesired workability, so that the tile adhesivebecomes more flexible.Consumption 1.5-4.0 kg/m2, depending on the trowel notch size and the nature of the substrate.
Waterproof grout for tiles, granites and tiles.Internal and External use.
High performance, Fast Setting, with extended open time, cement-based tile adhesiveExhibits high elasticity, excellent adhesion on all substrates, resistance to constant moisture, to frost and intense substrate movements.Applications: Suitable for rapid tiling of all types and sizes of ceramic tiles, natural stone, marble, granite, porcelain ceramic, on cementitious renders, cementitious screeds and concrete, for interior and exterior application on floor and walls.
