HOTLINE

Phone: (+357) 24823938

ISOMAT ACRYLIC COLOR WHITE PREMIUM ACRYL

/

High quality acrylic paint for exterior use.
ISOMAT-ACRYL is characterized by high water repellency, coverage and resistance to weather conditions and time.
It exhibits strong adhesion to any kind of new and soft substrate such as plaster, concrete, wood, etc.
It is easy to work with and dries quickly.
It allows the building to breathe. It is certified as a cool color.
Creates a final surface with a flawless matte effect.
ISOMAT-ACRYL is applied externally on new or old surfaces, on all building materials, such as concrete, plaster, bricks, asbestos cement, gypsum boards, wood, etc.

MERCOLA CEMENT PORTLAND ISOMIX 4KG

/

ISOMIX CEMENT is a high quality Portland cement for building applications. Available in gray and white. It belongs to the category CEM II / A-L 42.5 R. According to ELOT EN 197.1

ADVANTAGES
Excellent adhesion
Excellent waterproofing
Excellent workability
Excellent abrasion resistance
High resistance to adverse weather conditions and humidity
Gives longer life to the constructions used

APPLICATIONS
Used for the manufacture of high quality mortars for repair, sealing and restoration plaster, as well as for any work where high quality cement is required.
It is also mixed with common cement in any proportion, to strengthen its strength.

KNAUF PILOMAX CEMENT MORTAR GRAY

/

Multipurpose mortar from Knauf. It is simply mixed with clean water. It is suitable for most small concrete works, such as concrete, steps, manholes, roads. It is pre-mixed and only requires the addition of pure water

SIKALATEX MAX MILK ADMIXED CEMENT MORTAR

/

SikaLatex® Max is a new and improved compound admixture of multi-purpose cement mortars, without APEO. It is a rich-textured, water-based, milky liquid, which gives the produced mortar improved properties and, above all, enhanced adhesion.

Meets the requirements of REACH legislation (without APEO)
Improves the adhesion of the mortar to all substrates, even on smooth surfaces (concrete, stone, brick, ferrous metals, glass and ceramics)
It produces mortars that can be worked and applied easily

SIKACEM IMPROVING ADDITIVE MORTAR EXTRABOND-100

/

SikaCem ExtraBond-100 is an enhanced styrene resin in the form of a concentrated milky liquid. It is used as an additive in ariani, waterproof mortars, general purpose mortars and coatings and gives them additional advantages. Indicative features of SikaCem ExtraBond-100 are its excellent workability and adhesion to surfaces, elasticity and resistance to abrasion, frost and chemicals.

CONCRETE & MORTAR IMPROVEMENT ISOMIX RESIN SBR 400

/

ISOMIX RESIN SBR 400 is a new concentrated nanotechnology latex reinforcement and admixture. It is based on pure synthetic and nano-microtechnology particles. It is ideal for improving adhesion, sealing, flexibility and workability of cement admixtures, plasters, etc.
ADVANTAGES
 New nano-microtechnology
 Strong adhesion to old and new concrete, steel, wood and
common building surfaces.
 Sealing of cement admixtures
 Crack prevention
 Reduced drying shrinkage of cement admixtures
 Improved frost resistance
 Improved mechanical properties
 Improved resistance to water, oil and chemicals
 High resistance to impact and wear
 High elasticity (at high resin addition)
 Improved workability with simultaneous water content
 Does not require antifoam

WATERPROOFING CEMENT-BASED SLURRY GRAY

/

Curable waterproofing cement-based mortar. Provides complete tightness at hydrostatic pressure up to 5 atm according to EN 12390-8. Suitable for waterproofing basements and tanks. Ideal for drinking water tanks according to W-347, ISO 8467. It offers the possibility of post-sealing of underground spaces internally, applied from the opposite side of the water. It is classified as a product for the protection of concrete surfaces, according to standard EN 1504-2.

Shopping Cart