HOTLINE

Phone: (+357) 24823938

PGP FIBRATED FILLER WHITE

/

PGP FIBRATED FILLER is a ready-to-use, stone wool-reinforced acrylic building putty for interior and exterior use. It is suitable for filling cracks and holes in masonry, ceilings, floors and doors. Thanks to its special composition it does not crack and holds and absorbs movements and vibrations without breaking. It is applied to all common building surfaces.

ADVANTAGES
Ready to use
Reinforced with stone wool
Easy to work with, fills and layers excellently
It dries quickly and is easily sanded
Shows minimal shrinkage with no pitting
Offers excellent stability after drying
Creates a perfect – non-absorbent – surface ready to be sanded and painted
Indoor and outdoor use
Speed – cleanliness
APPLICATIONS
Stocking imperfections on walls and ceilings of building surfaces before painting.
It is suitable for plaster, smooth concrete surfaces, aerated concrete, gypsum board, cement board, etc.

SMALTOFILL ACRYLIC STUCCO

/

White stucco spatula based on acrylic resins, suitable for internal and external use. It can be used on surfaces of wood, gypsum, concrete, plaster etc.

Easy to work with, it gives uniform spreading and good filling properties, it doesn’t sag.

Fast drying and easy to sandpaper and gives a smooth and tough surface.

Category:

– Undercoat Wall Primers


Surface:

– EXTERIOR SURFACE > WALL
– INTERIOR SURFACE > WALL
– EXTERIOR SURFACE > WOOD
– INTERIOR SURFACE > WOOD

MERCOLA JOINT FILLER

/

DESCRIPTION:

JOINT FILLER is a ready mixed white acrylic plasterboard filler suitable for filling joints and cracks as well as smoothing and preparing surfaces prior to painting. It provides a flat and smooth final surface ready for priming and painting. It is also suitable for filling and coating cracks and holes on plaster and concrete surfaces.

ADVANTAGES:

Ready mixed formula
Smoothes uneven surfaces
Excellent workability, offers a tough smooth finish
Dries fast
Presents low shrinkage
Forms a perfect substrate, ready for painting
Interior use
Rapid and clean application

APPLICATIONS:

It is suitable for filling and coating cracks as well as smoothing and preparing plasterboards prior to painting.
Filling and grouting plasterboards combined with joint tapes
Fills gaps and imperfections on plaster and gypsum surfaces and constructions.

SPECIFICATIONS:

Coverage: 2 – 3 kg/m2

Thinning: no

Application: by knife

Touch dry: 2 – 3 hours 20oC

Hard dry: 4 – 5 hours 20oC

Exterior use

Interior use

Application temperature: 10oC – 35oC

Cleaning: with water

INSTRUCTIONS FOR USE:

INSTRUCTIONS FOR USE

Surfaces must be dry and clean from dust, grease, loose particles and other contamination. For deeper cracks or joints application of water-based primer ISOCRYL PRIMER DUR AQUA is recommended.
Smoothing surfaces

Apply filler with a spatula in two layers
Allow the first coat to dry before applying the second

Grouting and gap filling

Place the self-sticking tape along the joint or crack
Apply filler with a spatula in two layers
Allow the first coat to dry before applying the second
If a non self-sticking tape is used apply a first layer of filler along the joint
While the product is still fresh place the tape along the joint and press it into the filler
Allow the first coat to dry and follow with the second layer
Allow the second coat to dry and follow with sanding to a smooth finish
The final surface may be primed and painted
Close lid immediately after use to prevent drying

It is advisable to perform a suitability test prior to full scale application
REMARKS

Do not use to fill plastics or metals
Do not apply in temperatures (ambient and surface) below 5oC
Not suitable for repairs to permanently wet areas

VECHRO SMALTOLUX MASTER PRIMER ECO

/

High quality ecological acrylic water based primer suitable for interior and exterior use.
It gives excellent adhesion used on wood, MDF, metal, glass, hard PVC, galvanized, aluminum, polyester.
It is pleasant and easy in application because of its low odor. It is ideal primer of water-based enamels
SMALTOLUX hydro master primer (ecological), in order to give higher covering and endurance.

easy in application
low smell efficiency
excellent covering power
Covering power: 10 – 12 m2 /lt per layer

Drying: 1-2 hours touch free. Sandpaper after 4–5 hours.

Recoatability: Recoatable 6-8 hours after application.

Color shades :White and several pastel shades via VECHRO Tinting system. Avoid to use other colorants!

Packing: 750ml & 2,5lt

SMALTOLUX hydro MASTER PRIMER needs no risk or safety instructions according to legislation.
This product fulfills the ecological criteria 312/2014/ΕE for indoor and outdoor paints and varnishes.

VECHRO OXIDOL PRIMER

/

Anticorrosive primer, with low VOC content
and lower odor during application. Gives excellent
anticorrosive protection to metal surfaces even in
strong corrosive conditions and very good adhesion.
It doesn’t contain toxic pigments. Easy to apply with very good leveling.

GREY COLOUR

RUSTOLEUM ADHESION PRIMER

/

Adhesive primer for non-absorbent
surfaces with smooth finish, such as
galvanized steel, stainless steel, aluminium, copper and glass.

Easy application
Transparent blue appearance
Final coat can be applied after 30 minutes
Excellent adhesion High coverage

ISOMAT ISOLAC PRIMER AQUA PRIMER ECO

/

Acrylic, eco-friendly, water-based primer for wooden surfaces.
Suitable for indoor and outdoor use. Provides excellent adhesion to the substrate and great coverage.
Used on new or old wooden surfaces and is the ideal substrate for the water-based enamel paint ISOLAC AQUA ECO.
It is odorless and environment- and user-friendly.

COLOR
White.

CONSUMPTION
Approx. 12 m²/l per layer.

VECHRO SMALTOLUX VELATOURA

/

New generation undercoat based on special alkyd resins for interior and exterior use with low VOC content and lower odor during application. It can be used on surfaces of wood and MDF. Due to its special composition gives good fill, easy application and excellent brush ability, great covering, easy sanding and quick recoat ability. Covering Power: 14 – 18 m²/lt. Drying: 1 – 2 hours. Recoatability: 6 – 10 hours. Application: Brush, Roller, Spraygun.

Shopping Cart