MERCOLA SUPER LITE PUTTY

DESCRIPTION:

SUPER LITE is a revolutionary ready mixed lightweight white filler based on a new micro cell technology. It is ideal for the preparation of surfaces in one go prior to painting. It is suitable for plaster, concrete, brick, stones, render, wood and much more.
ADVANTAGES

Fills all cracks in one go – No need to build up layers of filler
Easy to use – lightweight paste is easy to apply
Quick drying – ready to paint/prime in 30 minutes – 1 hour
Sanding is not required – finishes to a smooth finish
No sagging
Non-shrink
Interior and exterior use
Rapid and clean application

APPLICATIONS

It is suitable for quick and easy preparation of surfaces prior to painting as well as filling cracks of interior and exterior surfaces.
It is suitable for plaster, smooth concrete surfaces, brick, stones, render, wood, plasterboard, cement board and much more.

SPECIFICATIONS:

Coverage: acording to application

Thinning: no

Application: by knife

Touch dry: 30 minutes 20oC

Hard dry: 1 - 2 hours 20oC

Exterior use

Interior use

Application temperature: 10oC - 35oC

Cleaning: with water


INSTRUCTIONS FOR USE:

Surfaces must be dry and clean from dust, grease and loose particles and other contamination
Apply with a spatula or spreader
Press the filler onto the surface - hole.
Smooth over surfaces with spatula or knife
Sanding is not normally required, although if needed it can be sanded
The final surface may be primed and painted
Close lid immediately after use to prevent drying

It is advisable to perform a suitability test prior to full-scale application

REMARKS

Do not use to fill plastics or metals
Do not apply externally when rain is imminent (within 5 hours of application)
Do not apply at temperatures (ambient and surface) below 5oC
Not suitable for repairs to permanently wet areas